Considerations when using luminous printing paste

( 1 ) selection of 80 to 100 mesh screen cloth plate printing better.
( 2 ) storing luminous should now use the existing printing paste , paste in the distribution process should be taken to avoid mixing strong electrolyte and heavy metal ions in order to ensure the quality of the slurry .
( 3 ) deployment of good luminescent light emitting printing paste should endeavor to run out within eight hours , not long put .
( 4 ) If the dye or paint and other powdered paint pigments, printing paste flowers should be noted that the color bit version or spendthrift Priorities , general dye or paint color bit first , storing luminous after printing paste , printing paste can not be storing luminous superimposed on other printing paste , or affect the glow.
( 5 ) colored fabric has a great influence on the light. As to the brightness of white, luminescent color printing is 100 , the brightness of a light colored printing only about 80 to 90 range, deep in color printing will be in 80 or less of the brightness . The main reason is the light reflecting white or light colored fabric was stronger than the dark colored fabrics , dark colored part of the luminescent material absorbs light , so the light emission luminance decrease . When non- white printed material substrates should be printed in the issuance of a layer of white printing paste should be glow in the dark material by a light layer of the substrate to do , so you can guarantee glow.
( 6 ) printed on the fabric , by adjusting the viscosity of the printing paste storing luminous reasonable printing method and a light emitting layer to control the minimum film thickness of not less than 100 microns to about 130 microns is appropriate , therefore, the thickness can also be used thick colored plastic version version version to ensure the film thickness, can achieve the best lighting effects .